Westermo RedFox Series - Manual (Page 889)

Westermo OS Management Guide
Version 4.17.0-0
38.3.1 Managing serial port settings
Syntax port [serial|...]
Context Global Configuration context
Usage Enter the Serial Port Configuration context for the given port.
A ”PORTLIST” is a comma separated list of ranges of serial ports without
intermediate spaces, e.g., ”1/1,1/2” on a slotted product, or ”1-3,5” on a
non-slotted product.
The port qualifier keyword ”serial” is not needed if the numbers in the
”PORTLIST” are unique to serial ports.
Use ”show port serial ” to show all configuration settings for a
given serial port (also available as ”show” command within the
Serial Port
Configuration context).
For a more general description of the ”port” command, see section 8.3.1 .
Default value Not applicable.
38.3.2 Setting port speed
Syntax [no] speed <300-2000000>
Context Serial Port Configuration context
Usage Set serial port data rate.
❼ Possible data rates for RS-232 (and RS-422/485) are: 50, 75, 110, 134,
150, 200, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600,
115200 bits/s
❼ Additional data rates for RS-422/485 : 230400, 315000, 460800, 500000,
576000, 615000, 921600, 1000000, 1152000, 1500000, 2000000 bits/s
Use ”no speed” to reset the serial port data rate to the default setting.
Use ”show speed” to show the serial port speed setting.
Default value 115200 (bits/s)
➞ 2015 Westermo Teleindustri AB 889