Westermo RedFox Series - Manual (Page 786)

Westermo OS Management Guide
Version 4.17.0-0
Use ”show remote” to show the configured remote endpoint IP for this tun-
nel.
Default values None
34.3.5 Outbound interface
Syntax [no] outbound
Context GRE Tunnel Configuration context
Usage Set the outbound interface of this tunnel.
Use this to set a specific interface that will be used for sending and receiving
the GRE packets for this tunnel instance.
Use ”no outbound” to automatically select the interface leading to the de-
fault gateway as outbound interface.
Use ”show outbound” to show the configured outbound interface for this
tunnel. ”Default Gateway” is shown if the interface leading to the default
gateway should be used as outbound interface.
Default values Auto (”no outbound”)
34.3.6 Time to Live setting
Syntax [no] ttl
Context GRE Tunnel Configuration context
Usage Set the Time to Live parameter for the GRE packets
Use this to set a specific Time to Live (TTL) value that will be used in the IP
header for the outbound GRE packets for this tunnel instance.
Use ”no ttl” to use the TTL defined for the interface where the GRE packets
are routed out.
Use ”show ttl” to show the configured TTL value for this tunnel.
Default values Inherit (”no ttl”)
786 ➞ 2015 Westermo Teleindustri AB