Westermo RedFox Series - Manual (Page 643)

Westermo OS Management Guide
Version 4.17.0-0
Use ”show passive-interface” to show the default behaviour of RIP inter-
faces (passive or active).
Default values Active (”no passive-interface”)
28.3.7 Configure Distribution of Default Route into RIP Domain
Syntax [no] distribute-default
Context Router RIP Configuration context
Usage Inject a default route into the RIP domain, i.e., announce that this router
can reach network 0.0.0.0/0.
Use ”[no distribute-default” to stop this router from injecting a default
route into the RIP domain.
Use ”show distribute-default” to show the RIP redistribution settings.
Use ”show redistribute” to show all redistribution settings, or ”show redistribute
connected”, etc., to show redistribute settings for specific types of redistri-
bution.
Default values Disabled (”no distribute-default”)
28.3.8 Configure Redistribution of External Route Information
into RIP Domain
Syntax [no] redistribute
Context Router RIP Configuration context
Usage Import external routing information into the RIP domain. Redistribution
of connected routes, static routes, and routes learnt via OSPF is handled
independently, e.g., use ”redistribute ospf” to import routes learnt via
OSPF.
Use ”no redistribute” to remove all redistribution, and ”no redistribute
ospf” to remove redistribution of routes learnt via OSPF, etc.
Use ”show redistribute []” to show the RIP
redistribution settings. Use ”show redistribute” to show all redistribution
settings, or ”show redistribute connected”, etc., to show redistribute
settings for specific types of redistribution.
➞ 2015 Westermo Teleindustri AB 643