Westermo RedFox Series - Manual (Page 142)

Westermo OS Management Guide
Version 4.17.0-0
7.3.16 Setting boot-menu password (Barebox)
Syntax [no] login
Context System Bootloader context
Usage Configure a boot-menu login password. Setting a boot-menu password
is recommended to improve security. When a password is configured, a
user must provide the correct password to enter the boot-menu at system
bootstrap.
When setting the password, you can either enter it as is (”login password
”), or provide a SHA1 hash of the password (”login hash ”).
Use ”no login” to disable the boot-menu login password.
Use ”show login” to see if a boot-menu login password is set or not.
Default values Disabled (no login)
Example
example:/boot/loader/#> login password TopSecret
example:/boot/loader/#> end
Saving bootloader configuration to FLASH
100% / [====================================================================]
example:/boot/#>
7.3.17 Setting rescue console UDP port (Barebox)
Syntax [no] rescue-port
Context System Bootloader context
Usage Configure UDP port for rescue-mode netconsole, e.g., ”rescue-port 12345”.
This is used as the local and remote port number for the UDP rescue console.
Defaults to UDP port 6000.
Use ”no rescue-port” to reset UDP port to the default (6000). Use ”show
rescue-port” to show the configured UDP port.
Default values 6000
142 ➞ 2015 Westermo Teleindustri AB