Westermo RedFox Series - Manual (Page 477)

Westermo OS Management Guide
Version 4.17.0-0
Example
example:/config/aaa/local-db-0/#> description PPPUsers
or ...
example:/config/aaa/local-db-0/#> description ’’PPP Users’’
21.3.6 Manage Remote (RADIUS) Server Connectors
Syntax [no] remote-server [type ]
Context AAA Configuration context
Usage Enter Remote Server Configuration context to create, modify or remove
a RADIUS server connector.
Use ”remote-server ” to create a new connector, or to enter the con-
figuration context of an existing connector. ”ID” must be a number greater
or equal to 0 and is referenced from other commands. As of WeOS v4.17.0,
you can specify up to 6 server connectors.
An optional ”type” parameter is used to specify the type of server. The only
supported type in the current version of WeOS is ”radius”.
Use ”no remote-server ” to remove a specific server, or
”no remote-server” to remove all configured servers.
Use ”show remote-server” to list all configured connectors, or
”show remote-server ” to show information on a specific connector.
Default values The ”type” parameter is ”radius” by default.
21.3.7 Set Remote Server Type
Syntax type
Context Remote Server Configuration context
Usage Set the remote server type.
Use this command to specify the type of a remote server connector. As of
WeOS v4.17.0, the only supported type is ”radius”.
Use ”show type” to show the configured remote server type.
Default values ”radius”
➞ 2015 Westermo Teleindustri AB 477