Westermo RedFox Series - Manual (Page 534)

Westermo OS Management Guide
Version 4.17.0-0
23.3.14 Show DHCP Relay Agent Settings
Syntax show dhcp-relay Also available as ”show” command within the DHCP
Relay Configuration context context.
Context Global Configuration context
Usage Show DHCP relay agent settings.
Default values
23.3.15 Show DHCP Relay Agent Per-port Settings
Syntax show port [PORTLIST] Also available as ”show” command within the
DHCP Relay Port Configuration context.
Context DHCP Relay Configuration context
Usage Show DHCP relay agent per port settings. Furthermore, not only the cir-
cuit ID type settings are listed, but also the resulting circuit ID.
Default values If no PORTLIST is given, settings are listed for all ports associ-
ated with the given (VLAN) interfaces (see also section 23.3.3 ).
Example
example:/config/dhcp-relay/#> show port
Port
Enabled Policy Circuit-ID type (Circuit ID)
==============================================================================
Eth 1
NO auto auto (Eth1)
Eth 2 NO auto auto (Eth2)
Eth 3 YES auto auto (Eth3)
Eth 4 YES auto auto (Eth4)
Eth 5 YES auto auto (Eth5)
Eth 6 YES auto auto (Eth6)
example:/config/dhcp-relay/#>
534 ➞ 2015 Westermo Teleindustri AB