Westermo RedFox Series - Manual (Page 426)

Westermo OS Management Guide
Version 4.17.0-0
An old configuration file with this setting is converted to set the selected
interface as distance 1 and keep other interfaces at their default distance of
16.
For more information, see section 19.2.6 .
19.6.5 Interface Administrative Distance
Syntax [no] distance <1-255> [trigger ID]
Context Interface Configuration context
Usage Administrative distance for routes learned on this interface.
Static routes learned dynamically, e.g. via DHCP, will be installed in the
routing table with this administrative distance.
Possible values are 1-255, where 1 is the best and 255 is infinity, it will be
visible in the routing table but will never be activated.
Use the form no distance to reset the value to its default value, 16. Use
distance 255 to prevent routes from ever being activated.
A trigger ID may be set, e.g., for monitoring an upstream network with a
ping trigger, and dynamically adjusting the default route to infinite distance.
Effectively switching to another upstream interface not only on link loss.
For more information, see section 19.2.6 .
Default values 16 (no distance)
Notes:
❼ A PPP interface created via PPPoE will ”inherit” the admin distance set-
ting from its associated VLAN interface.
❼ The old primary setting on an interface is converted to distance 1 and
all other interfaces are shifted downwards in priority.
❼ This setting does not apply to protocols such as RIP and OSPF.
19.6.6 Management Service Filtering
Syntax [no] management <[ssh][telnet][http][https][ipconfig][snmp]|all>
426 ➞ 2015 Westermo Teleindustri AB