Westermo RedFox Series - Manual (Page 25)

Westermo OS Management Guide
Version 4.17.0-0
192.168.55.100, netmask 255.255.255.0 and default gateway 192.168.55.1.
Router IP address:
192.168.55.1
PC
Host with SSHv2 client.
PC IP address and netmask known, e.g.,
IP address 192.168.55.35 and netmask 255.255.255.0
To Internet or
company Intranet
Router
Ethernet ports Console
Switch with default IP setting:
Default gateway: Disabled
IP address: 192.168.2.200
Netmask: 255.255.255.0
Should get the following settings:
IP address: 192.168.55.100
Netmask: 255.255.255.0
Default gateway: 192.168.55.1
WeOS switch
2. Modifying IP Settings on PC: The IP settings on the PC must be updated to
match the default settings on the switch, i.e., the PC should be assigned an
IP address on the 192.168.2.0/24 network, e.g.,
❼ PC IP address: 192.168.2.1
❼ PC Netmask: 255.255.255.0
❼ PC Default Gateway: Not needed
3. Connecting and Logging in: When connecting via SSH you will be asked to
enter a username and thereafter a password. For a switch using the factory
default settings, use the following login username and password:
❼ Login username: admin
❼ Password: westermo
The procedure to connect may vary slightly depending on what SSH client
you are using. The example below show the connection procedure using
Unix OpenSSH
4 . (On Windows one can use Putty 5 .)
4 OpenSSH, http://www.openssh.com
5 Putty, http://www.chiark.greenend.org.uk/~sgtatham/putty/
➞ 2015 Westermo Teleindustri AB 25