Westermo RedFox Series User Manual
Page 316
Westermo OS Management Guide
Version 4.17.0-0
Continued from previous page
Ring Coupling
Local/Global
Local - uplinks located on this switch.
Global - uplinks reported from other switches in the FRNT
ring.
Port
The uplink port name, if any available on the distributing
unit. Otherwise an information message stating that no
uplinks are available.
Active
A green check-mark indicates this is the active uplink for
the ring coupling instance.
MAC
The MAC address of the unit distributing this piece of up-
link information.
Effective Prior-
ity
The actual priority value used in uplink selection. When
configuring an adjustment delta this may differ from the
configured priority for an active uplink. Used to minimize
uplink changes when an active uplink goes down and up
again.
Path-Cost
The current path-cost. If auto configuration selected, this
value is calculated based on port speed.
Speed/Duplex
Speed duplex on the uplink port. Only applicable for local
uplinks.
Hello Time
The configured and effective (negotiated) hello-time on
each unit.
Synchronized
A green check-box indicates this uplink has been synchro-
nized with its neighbor. Only applicable for local uplinks.
Link Changes
Number of link changes. Only applicable for local uplinks.
Auto Refresh
Click on a value to make the page reload with updated
statistics automatically every 5, 15, 30 or 60 seconds.
Click Off to turn off auto refresh.
Refresh
Click on this button to reload with updated statistics.
1
If the port referred to as FRNT port ”M” and FRNT port ”N” in the FRNT statistics page (opera-
tional FRNT ”M” and ”N”) does not match the administratively configured FRNT ”M” and ”N” ports
(see the FRNT configuration page in
), the ports are logically swapped/aligned with
the ”M” and ”N” ports of the focal-point.
316
➞ 2015 Westermo Teleindustri AB