Westermo RedFox Series - Manual (Page 303)

Westermo OS Management Guide
Version 4.17.0-0
Usage Disables port-based access controls for specific ports. This is used to-
gether with ”dot1x-auth” and ”mac-auth” to exclude specific ports from
needing authentication. This is suitable for uplinks, trunks and ports with
servers connected. Use ”no except-auth” to remove all port exceptions,
thus enabling access control on all untagged ports in this VLAN.
Use ”show mac-auth” to view ports configured to be excluded from port-
based access control for this VLAN.
Default values Disabled, no ports excluded.
13.4.18 Show VLAN status (all VLANs)
Syntax show vlans
Context Admin Exec context
Usage Show VLAN status information for all VLANs.
Default values Not applicable.
13.4.19 Show Current MAC Forwarding Database
Syntax show fdb
Context Admin Exec context
Usage Show the current state of the MAC forwarding database. This includes
the list of MAC addresses known to the switch, and the port(s) to forward
packets to each MAC address. The ageing timeout for automatically learnt
unicast MAC addresses is also shown.
Default values Not applicable.
➞ 2015 Westermo Teleindustri AB 303