Westermo RedFox Series - Manual (Page 504)

Westermo OS Management Guide
Version 4.17.0-0
22.3.1 Manage DHCP Server
Syntax [no] dhcp-server
Context Global Configuration context
Usage Create, modify or remove a DHCP Server.
Enter DHCP server context. If this is a new DHCP server, the DHCP server
is created. As a side-effect, a caching (DNS) name server is started, which
forwards incoming DNS requests to the DNS server configured for the switch
(see
chapter 19 ).
Use ”no dhcp-server” to remove an existing DHCP server.
Use ”show dhcp-server” to list all settings of a DHCP server. Alternatively,
you can run the ”show” command from within the DHCP server context.
Default values Disabled (No DHCP server configured)
22.3.2 Disable DHCP Server
Syntax [no] enable
Context DHCP Server Configuration context
Usage Enable/disable the DHCP server. Useful to disable a fully setup DHCP
server before deployment, the configuration will remain dormant while dis-
abled.
Use ”no enable” to disable the DHCP server (without losing the DHCP server
configuration) and ”enable” to enable the DHCP server.
Use ”show enable” to show whether the DHCP server is configured enabled
or disabled.
Default values Enabled
22.3.3 Disable ICMP ”ping” Check
Syntax [no] ping-check
Context DHCP Server Configuration context
504 ➞ 2015 Westermo Teleindustri AB