Westermo RedFox Series - Manual (Page 377)

Westermo OS Management Guide
Version 4.17.0-0
Example
example:/config/#> show aggregate
a1
static 1-2
a2 lacp 5-6
example:/config/#> aggregate a2
example:/config/aggregate-a2/#> show
Name
: a2
Status : Enabled
Type : lacp
Ports : 5-6
LACP mode : active
LACP timeout : short
example:/config/aggregate-a2/#>
17.3.2 Enable/disable a Link Aggregate
Syntax [no] enable
Context Link Aggregate Configuration context
Usage Enable/disable this aggregate instance. Use ”enable” to enable and ”no
enable” to disable this aggregate. When disabled, the configured member
ports will not be part of this aggregate, i.e., they will operate as regular
(non-aggregate) ports.
Use ”show enable” to view the currently configured setting.
Default values Enabled (”enable”)
17.3.3 Configure Link Aggregation Member Ports
Syntax [no] ports
Context Link Aggregate Configuration context
Usage Add/remove a list of ports to/from the port member set of this link ag-
gregate. Use ”no ports” (without providing a port list) to remove all ports
from the member set.
Use ”show ports” to view the currently configured list of ports.
Default values When using the ”no ports” form (without providing a specific
PORTLIST), all ports are removed.
➞ 2015 Westermo Teleindustri AB 377