Westermo RedFox Series - Manual (Page 834)

Westermo OS Management Guide
Version 4.17.0-0
Use ”no ike-lifetime” to return to the default setting.
Use ”show ike-lifetime” to show the configured IKE (phase 1) security
association lifetime setting (in seconds).
Default values 3600 seconds (1h)
35.3.28 Configure SA (ESP) Lifetime
Syntax [no] sa-lifetime
Context IPsec Configuration context
Usage Set the ESP (phase 2) security association lifetime. When this time has
passed, a new phase 2 negotiation will be initiated. The remote peer may
use a different value. In that case, the peer with the lowest timeout will
initiate the renegotiation first.
Use ”no sa-lifetime” to return to the default setting.
Use ”show sa-lifetime” to show the configured ESP (phase 2) security
association lifetime setting (in seconds).
Default values 28800 seconds (8h)
35.3.29 Show IPsec Tunnel Status
Syntax show tunnel ipsec [ID]
Context Admin Exec context.
Usage Show the status for all or for a specific IPsec tunnel.
Default values If no tunnel ID is specified, the status of all tunnels is shown.
834 ➞ 2015 Westermo Teleindustri AB