Westermo RedFox Series - Manual (Page 866)

Westermo OS Management Guide
Version 4.17.0-0
36.3.15 Change authentication hash
Syntax [no] auth
Context SSL VPN Configuration context Authenticate packets with HMAC using
message digest. Use ”no auth” to disable the authentication hash.
Default values sha1
36.3.16 Configure protocol
Syntax [no] protocol
Context SSL VPN Configuration context
Usage Select the protocol to encapsulate the traffic in.
Default values UDP
36.3.17 Configure port
Syntax [no] port
Context SSL VPN Configuration context
Usage In client mode, this selects the port to connect to on the server, in server
mode, this selects which port to listen for incoming connections on.
Note
A neat function when using SSL VPN is to listen on TCP ( Section 36.3.16 )
port 443, this will allow the tunnel to pass almost all firewalls, since
the traffic will look like it is HTTPS. To achieve this in server mode you
will have to move HTTPS on the WeOS unit to a separate port. See
Section 7.3.45 .
Default values 1194
36.3.18 Configure Outbound Interface
Syntax [no] outbound
866 ➞ 2015 Westermo Teleindustri AB