Westermo RedFox Series - Manual (Page 432)

Westermo OS Management Guide
Version 4.17.0-0
19.7.1 Manage Global IP Settings
Syntax ip
Context Global Configuration context
Usage Enter IP Configuration context
Use ”show ip” to show general IP configuration settings.
Default values Not applicable.
19.7.2 Configure IP Default Gateway
Syntax [no] default-gateway
Context IP Configuration context
Usage This command is deprecated and only kept for backwards compatibility
when upgrading. It is recommend to instead use the route command since
it also has the distance attribute.
A default route configured using this command will always get a distance
of 1. With multiple upstream WAN connections using PPPoE or DHCP it is
recommended to use the route command instead.
Use ”show gateway” to show configured default gateway.
Default values Disabled (”no default-gateway”)
19.7.3 Configure Static IP Routes
Syntax [no] route [DISTANCE]
Context IP Configuration context
Usage Add or remove a static IP route, including default routes.
The network boundary of the destination subnet can be given as a netmask
(e.g., ”route 192.168.3.0 255.255.255.0 192.168.0.1”) or as a prefix
length (e.g., ”route 192.168.3.0/24 192.168.0.1”).
System default routes are setup using the subnet 0.0.0.0 with prefix length
0, but the key keyword ’default’ is much easier to use ”route default
432 ➞ 2015 Westermo Teleindustri AB