Westermo RedFox Series - Manual (Page 338)

Westermo OS Management Guide
Version 4.17.0-0
Use ”no coupling” to remove the ring coupling instance.
Use ”show coupling” to show configuration information for the ring cou-
pling instance. (Also available as ”show” command within the
FRNT Ring
Coupling Configuration context.)
Default values Default ID is 1
15.3.2 Enable/Disable FRNT Ring Coupling
Syntax [no] enable
Context FRNT Ring Coupling Configuration context
Usage Enable or disable an FRNT Ring Coupling instance. Use ”enable” to
enable the coupling instance, and ”no enable” to disable the coupling in-
stance (without losing configuration settings for this instance).
Use ”show enable” to show whether the coupling instance is enabled or
disabled.
Default values Enabled
15.3.3 Set FRNT Ring Coupling Hello Interval
Syntax [no] hello-interval <50..10000>
Context FRNT Ring Coupling Configuration context
Usage Use ”hello-interval VALUE” to set the hello interval (in milliseconds)
to be announced by his ring coupling node.
Note
The effective hello-interval used will be the highest interval announced
by any ring coupling node in the FRNT ring.
”no hello-interval” resets the configured hello interval to the default set-
ting (100 milliseconds).
Use ”show hello-interval” to show the configured hello interval.
Default values 100 (msec)
338 ➞ 2015 Westermo Teleindustri AB