Westermo RedFox Series - Manual (Page 433)

Westermo OS Management Guide
Version 4.17.0-0
192.168.0.1”. The optional distance is useful when setting up backup
routes in multiple upstream scenarios where interfaces acquire default routes
using PPPoE or DHCP.
The destination network is however typically located remotely (specify the
next hop gateway, e.g., ”route 192.168.3.0/24 192.168.0.1”), but it is
also possible to use the static route command to specify additional directly
connected subnets (specify the local interface, e.g., ”route 192.168.3.0/24
vlan1”).
Use the ”no”-form to remove a static route, e.g., ”no route 192.168.3.0/24
192.168.0.1”.
Use ”show route” to list configured static routes.
Default values Using ”no route” (without a subnet address, etc.) removes all
configured static routes.
19.7.4 Manage IP Forwarding
Syntax [no] forwarding
Context IP Configuration context
Usage (only for WeOS Extended) Enable/disable IPv4 routing.
Use ”show forwarding” to show whether IP forwarding (routing) is enabled
or disabled.
Default values Enabled (”forwarding”)
19.7.5 Name Server (DNS)
Syntax [no] name-server
Context IP Configuration context
Usage Add/remove name-server (DNS). Two name-servers can be configured -
call the same ”name-server” command twice.
Run ”no name-server
➞ 2015 Westermo Teleindustri AB 433