Westermo RedFox Series - Manual (Page 344)

Westermo OS Management Guide
Version 4.17.0-0
Context Admin Exec context
Usage Use ”show coupling” to show status of FRNT Ring Coupling.
Default values Not applicable
Example
example:/#> show coupling
==================================================================== ID 0x0101
Local uplink(s) --------------------------------------------------------------
ID MAC Uplink Prio/Delta Cost Speed Hello
------------------------------------------------------------------------------
>> 7
00:07:7c:84:90:44 eth 7 128/0 200000 100-Full 100(100)ms
Global uplink(s) -------------------------------------------------------------
MAC Uplink Prio Cost Hello
------------------------------------------------------------------------------
00:07:7c:87:85:62 eth 7 128 200000 100(100)ms
example:/#>
The active uplink is marked with >>. In this case, lowest MAC address was used
as tie-breaker to elect active uplink.
15.3.14 Show Multi-Link Dual-Homing Status
Syntax show dual-homing
Context Admin Exec context
Usage Use ”show dual-homing” to show status of Multi-Link Dual-Homing in-
stances.
Default values Not applicable
344 ➞ 2015 Westermo Teleindustri AB