Westermo RedFox Series - Manual (Page 341)

Westermo OS Management Guide
Version 4.17.0-0
”dual-homing ID” creates a dual-homing instance with given ID, unless it
already exists.
Up to MAX_DUAL_HOMING_INSTANCES ( section 15.4 ) can be created.
Use ”no dual-homing ID” to remove a specific dual-homing instance, or
”no dual-homing” to remove all dual-homing instances.
Use ”show dual-homing” to list configuration information on all dual-homing
instances, and ”show dual-homing ID” for configuration information on a
specific dual-homing instance (also available as ”show” command within the
Dual-Homing Configuration context).
Default values Default ID is 1
15.3.8 Enable/Disable Multi-Link Dual-Homing
Syntax [no] enable
Context Dual-Homing Configuration context
Usage Enable or disable a dual-homing instance. Use ”enable” to enable the
dual-homing instance, and ”no enable” to disable the dual-homing instance
(without losing configuration settings for this instance).
Use ”show enable” to show whether the dual-homing instance is enabled
or disabled.
Default values Enabled
15.3.9 Synchronized Multi-Link Dual-Homing
Syntax [no] synchronized
Context Dual-Homing Configuration context
Usage Enable or disable the dual-homing synchronization feature. When en-
abled, preference when selecting active uplink will be given to uplinks where
the uplink peer announces that it has connectivity to ring-coupling node with
active uplink. See
section 15.1.2.1 for more information.
Use ”synchronized” to enable and ”no synchronized” to disable synchro-
nized dual-homing.
➞ 2015 Westermo Teleindustri AB 341