Westermo RedFox Series - Manual (Page 639)

Westermo OS Management Guide
Version 4.17.0-0
28.3 Managing RIP via the CLI
The table below shows RIP management features available via the CLI.
Command Default Section
Configure General RIP Settings
router
Sec. 26.3.1
[no] rip Disabled Sec. 28.3.1
[no] version <1|2> version 2 Sec. 28.3.2
[no] timers [update ] update 30 Sec. 28.3.3
[invalid ] invalid 180
[flush ] flush 240
[no] network Sec. 28.3.4
[no] neighbor Sec. 28.3.5
[no] passive-interface Active Sec. 28.3.6
[no] distribute-default Disabled Sec. 28.3.7
[no] redistribute connected Disabled Sec. 28.3.8
[no] redistribute static Disabled Sec. 28.3.8
[no] redistribute ospf Disabled Sec. 28.3.8
[no] distance <1-255> 120 Sec. 28.3.9
Configure Interface Specific RIP Settings
interface
Sec. 19.6.1
[no] rip Sec. 28.3.10
[no] passive [auto] Auto Sec. 28.3.11
[no] split-horizon [poisoned-reverse] Enabled Sec. 28.3.12
[no] send-version <1,2> Auto Sec. 28.3.13
[no] receive-version <1,2> Auto Sec. 28.3.14
[no] auth Disabled Sec. 28.3.15
View RIP Status
show ip rip
Sec. 28.3.16
➞ 2015 Westermo Teleindustri AB 639