Westermo RedFox Series - Manual (Page 913)

Westermo OS Management Guide
Version 4.17.0-0
39.3 Managing Serial Over IP via the CLI interface
The table below shows Serial Over IP management features available via the CLI.
Command Default Section
Configure Serial Over IP settings
seroip
Section 39.3.1
Settings common to all modes
[no] mode
server Section 39.3.2
[no] port Disabled Section 39.3.3
[no] frame-separator <0-255> Disabled Section 39.3.4
[no] frame-delay <1-2550> 20 Section 39.3.5
[no] frame-size <1-1460> 1000 Section 39.3.6
Additional Server mode (TCP) settings
[no] listen
Disabled Section 39.3.7
[no] protocol Disabled Section 39.3.8
[no] listen-secondary port Disabled Section 39.3.9
[no] secondary-mode slotted Section 39.3.10
raw|slotted > 600
[no] dtr-control Disabled Section 39.3.11
Additional Client mode (TCP) settings
[no] peer
Disabled Section 39.3.12
[,ADDRESS:PORT,...]>
[no] dtr-control Disabled Section 39.3.11
Additional Peer mode (UDP) settings
[no] listen
Disabled Section 39.3.7
[no] peer Disabled Section 39.3.12
[,ADDRESS:PORT,...]>
[no] mcast-group Disabled Section 39.3.13
[no] dynamic-peer Disabled Section 39.3.14
Additional AT Command mode settings
[no] listen
Disabled Section 39.3.7
Continued on next page
➞ 2015 Westermo Teleindustri AB 913