Westermo RedFox Series - Manual (Page 863)

Westermo OS Management Guide
Version 4.17.0-0
36.3.6 Configure an address pool
Syntax [no] pool start | end > [netmask
NETMASK]
Context SSL VPN Configuration context (Only valid when server)
Usage Auto configure all clients connecting to us, if netmask is omitted it will be
set to the default mask for the address class for the start address.
Note
The address of the server interface will be untouched, you will need
to configure it manually from the interface context for the ssl-interface
Sec. 19.6.1 .
Example
example:/config/tunnel/ssl-19/#> pool 192.168.253.2 num 10
Default values Disabled
36.3.7 Push networks to connecting clients
Syntax [no] push-network
Context SSL VPN Configuration context (Only valid when server)
Usage This is a part of the auto-configuration of the clients, push networks (Max
is 10) to the clients, these routes will automatically be set as routes to us as
long as the client has ”pull” enabled.
Default values Disabled
36.3.8 Change remote peer
Syntax [no] peer
Context SSL VPN Configuration context (Only valid when client)
Usage Set the peer for the client to connect to.
Default values Disabled
➞ 2015 Westermo Teleindustri AB 863