Westermo RedFox Series User Manual
Page 873
Westermo OS Management Guide
Version 4.17.0-0
ing this guide (
By default, all VLAN interfaces except for the interface that connects to Internet
are added and exported into WeConnect (in the example above, vlan2 will be
exported). You can remove and add interfaces manually using the delete icon
,
and the interface select menu together with the Add button.
Enter the Secure Network Code and One Time Password obtained from the
WeConnect on-line portal:
Click Setup. This downloads and installs the configuration and certificates that
enables WeConnect on your unit.
This is shown at the top of the page if everything went OK:
The setup is now complete, and the unit will connect to your secure network
automatically.
After installing WeConnect you can go to the WeConnect page again via the menu
to see the status of the SSL VPN tunnel. Example, with the tunnel up:
The warning message shown above the status information does not indicate an
error, but serves as a notification that WeConnect is already set up and the in-
staller can not be run again.
➞ 2015 Westermo Teleindustri AB
873