Westermo RedFox Series - Manual (Page 770)

Westermo OS Management Guide
Version 4.17.0-0
33.3.1 Managing PPPoE connections
Syntax [no] pppoe
Context Global Configuration context
Usage Enter the PPPoE configuration context of the given PPPoE instance ID. If
this is a new PPPoE instance, the PPP instance will be created first upon
leaving the PPP context with end or leave. An associated network interface
pppoe (e.g., pppoe0) will be created (see
chapter 19 ).
Use ”no pppoe ” to remove an existing PPP instance, or no pppoe to
remove all PPP instances.
As of WeOS v4.17.0 only a single PPPoE instance (ID ”0”) is supported.
Default values Not applicable.
33.3.2 PPPoE VLAN Interface Setting
Syntax [no] iface
Context PPPoE Configuration context
Usage Set the (VLAN) network interface where this PPPoE instance should oper-
ate, e.g., ”iface vlan10”.
Use ”show iface” to check the interface setting for this PPPoE instance.
Default values None defined
33.3.3 PPPoE Service Name
Syntax [no] service-name
Context PPPoE Configuration context
Usage ISP name or a class of service configured on PPP.
Use ”show service-name” to check the service name setting for this PPPoE
instance.
Default values Disabled (”no service-name”)
770 ➞ 2015 Westermo Teleindustri AB