Westermo RedFox Series - Manual (Page 785)

Westermo OS Management Guide
Version 4.17.0-0
34.3.2 Enable/disable a GRE tunnel
Syntax [no] enable
Context GRE Tunnel Configuration context
Usage Enable, or disable this GRE tunnel.
Use ”enable” to enable and ”no enable” to disable a GRE tunnel.
Use ”show enable” to show whether this GRE tunnel is enabled or disabled.
Default values Enabled
34.3.3 Local endpoint IP
Syntax [no] local
Context GRE Tunnel Configuration context
Usage Set the local endpoint IP for the GRE packets in this tunnel.
This IP together with the remote endpoint IP will be used for the outer GRE
packets carrying the tunnelled traffic. Data going out trough the tunnel
from this node will be encapsulated in a GRE datagram using the local IP as
source IP and the remote IP as destination IP. Incoming GRE datagrams with
destination IP matching local IP and the source IP matching remote IP will be
considered belonging to this GRE tunnel.
Use ”show local” to show the configured local endpoint IP for this tunnel.
Default values None
34.3.4 Remote endpoint IP
Syntax [no] remote
Context GRE Tunnel Configuration context
Usage Set the remote endpoint IP for the GRE packets in this tunnel.
This setting is used together with the local endpoint IP to specify the outer
GRE packets. More info in
section 34.3.3 .
➞ 2015 Westermo Teleindustri AB 785