Westermo RedFox Series User Manual
Page 581
Westermo OS Management Guide
Version 4.17.0-0
❼ FLASH means that the LED is blinking with a higher frequency.
❼ SHDSL LEDs only apply to products with SHDSL ports.
❼ xDSL (ADSL/VDSL) LEDs only apply to products with xDSL ports.
❼ TD and RD LEDs only apply to products with serial port(s). As the WeOS
serial ports operate in DCE mode, TD denotes receiving, and RD denotes
transmitting serial data.
1
Viper has a common power indicator LED named ”DC”. When the ”DC” LED is ”GREEN” power
is OK on DC1 and DC2. When the ”DC” LED is ”RED” there is a power failure on DC1 or DC2.
2
The ”USR1” LED is referred to as ”VPN” on some WeOS products and ”ST2” on older RFI prod-
ucts.
3
Only for products with software level WeOS Extended. As of WeOS v4.17.0, the USR1/VPN LED
presents VPN status as described above. Alternative (configurable) use is intended but not yet
supported.
4
Only applicable for the DDW-142-485[
] product.
➞ 2015 Westermo Teleindustri AB
581