Westermo RedFox Series - Manual (Page 771)

Westermo OS Management Guide
Version 4.17.0-0
33.3.4 PPP Modem: Managing PPP over Serial Port and Modem
Syntax [no] modem
Context Global Configuration context
Usage Enter the PPP Modem configuration context of the given modem instance
ID (defaults to ID ”0”). If this is a new modem instance, the modem instance
will be created first upon leaving the modem context with end or leave. An
associated network interface modem (e.g., modem0) will be created
(see
chapter 19 ).
Use ”no modem ” to remove an existing modem instance, or no modem
to remove all modem instances.
As of WeOS v4.17.0 only a single modem instance (ID ”0”) is supported.
Default values Not applicable.
33.3.5 PPP Modem Serial Port
Syntax [no] port
Context PPP Modem Configuration context
Usage Serial port connected to external modem or null modem cable.
Use ”show port” to view which port will be used for communication.
Default values The first (lexicographically) enabled and available port will be
chosen when creating a new modem instance. If there are no eligible ports,
it will be disabled (”no port”).
33.3.6 PPP Modem Dial Mode
Syntax [no] dial
Context PPP Modem Configuration context
Usage Dial mode with external modem or null modem mode.
❼ ”no dial”: Null modem mode.
❼ ”dial in”: Dial-in. WeOS will respond to incoming calls.
➞ 2015 Westermo Teleindustri AB 771