Westermo RedFox Series - Manual (Page 680)

Westermo OS Management Guide
Version 4.17.0-0
Example
example:/config/#> alarm
example:/config/alarm/#> trigger ping
example:/config/alarm/trigger-2/#> peer 192.168.3.11 outbound vlan2
example:/config/alarm/trigger-2/#> end
example:/config/alarm/#> end
example:/config/#> router
example:/config/router/#> vrrp 33
example:/config/router/vrrp-33/#> address 192.168.2.1
example:/config/router/vrrp-33/#> priority 150
example:/config/router/vrrp-33/#> track trigger 2 adjust -100
example:/config/router/vrrp-33/#> leave
example:/#> copy running start
30.3.11 Configure VRRP Synchronisation
Syntax [no] sync
Context VRRP Instance Configuration context
Usage Configure synchronization between two VRRP instances. This will spec-
ify a state monitoring between two VRRP instances. It guarantees that two
VRRP instances remain in the same state. The synchronized instances mon-
itor each other. Changing this parameter will change the same parameter
on the corresponding instance.
Use ”no sync” to remove synchronization for this instance, this will remove
synchronization for the corresponding instance as well.
Use ”show sync” to show the configured VRRP instance ID this instance is
synchronized with.
Default values Disabled
Example In this example, virtual router instance 33 is synchronized with in-
stance 35.
Example
example:/config/#> router
example:/config/router/#> vrrp 33
example:/config/router/vrrp-33/#> sync 35
example:/config/router/vrrp-33/#> leave
example:/#> copy running start
680 ➞ 2015 Westermo Teleindustri AB