Westermo RedFox Series User Manual
Page 719
Westermo OS Management Guide
Version 4.17.0-0
Continued from previous page
New
Destination
Port
Optional. If another port or set of ports are used by the
destination host for the service you can map the port(s)
by entering another port or set of ports. Number of ports
must match the number of incoming destination ports.
Empty means that the incoming destination port will be
used. Note: New destination port can only be set for
single ports. Multi-port ranges can not be remapped to a
new port range. You must use multiple single-port map-
pings to achieve this. If JavaScript is enabled, the range
start may be selected in the drop down.
Log
Controls if a match on this rule should be logged in the
kernel log file. Nothing will be logged unless logging is
also enabled under the common firewall settings.
31.2.6
Edit Port Forwarding Rule
Menu path: Configuration ⇒ Firewall ⇒ Port Forwarding ⇒
In the Edit Port Forwarding Rule configuration page you can change an ex-
isting port forwarding rule.
See
for description of editable fields.
➞ 2015 Westermo Teleindustri AB
719