Westermo RedFox Series - Manual (Page 390)

Westermo OS Management Guide
Version 4.17.0-0
Default auto
18.3.2 IGMP Querier Interval
Syntax [no] igmp-interval <12|30|70|150>
Context IP Configuration context
Usage Set IGMP Querier interval (seconds). The same interval is used for all
interfaces.
”no igmp-interval” resets the IGMP Querier interval to the default setting,
”12” sec.
Use ”show igmp-interval” to view configured IGMP Querier interval.
Default 12 (sec)
18.3.3 IGMP Fast Leave
Syntax [no] igmp-fast-leave-ports
Context IP Configuration context
Usage Add or remove IGMP Fast Leave ports. For details, see section 18.1.3
”no igmp-fast-leave-ports ” removes the specified port(s)
and ”no igmp-fast-leave-ports” all ports from the list of IGMP Fast Leave
ports.
Use ”show igmp-fast-leave-ports” to view configured multicast router
ports.
Default Disabled
A ”PORTLIST” is a comma separated list of port ranges without intermediate
spaces, e.g., ”1/1-1/3,2/3”.
18.3.4 Static Multicast Router Port Settings
Syntax [no] multicast-router-ports
Context IP Configuration context
390 ➞ 2015 Westermo Teleindustri AB