Westermo RedFox Series - Manual (Page 17)

Westermo OS Management Guide
Version 4.17.0-0
❼ WeConfig: is Westermo’s Network configuration management tool (NCM)
made for commissioning and maintenance of components in a network. It
replaces the former Westermo tool known as IPConfig. For further informa-
tion on WeConfig’s features and how to use the tool, see the WeConfig User
Guide[
54 ].
❼ Web: Configuration of IP settings via the Web interface is described in
sec-
tion 2.2.1 .
❼ CLI: Configuration of IP settings via the Command Line Interface (CLI) is
described in section 2.2.2 .
Hint
If you are not sure what IP address your switch has, use the WeConfig tool,
or the CLI via console method (
section 2.2.2.1 ). If neither of these methods
work, please visit section 7.1.3 for information on how to conduct a factory
reset.
➞ 2015 Westermo Teleindustri AB 17