Westermo RedFox Series - Manual (Page 904)

Westermo OS Management Guide
Version 4.17.0-0
ATD Dials a "phone number"
ATH Hang-up a connection
ATA Answer a call
ATO Go on-line, from on-line command mode
ATE<0|1> Set Echo on/off
ATQ<0|1> Set Quiet mode on/off
ATV<0|1> Set Verbose mode on/off
ATI Show identification
+++ The escape sequence.
A/ Repeat the last entered command
Table 39.1: Supported AT commands.
ATB Always responds OK
ATC ”
ATF ”
ATG ”
ATH ”
ATJ ”
ATK ”
ATL ”
ATM ”
ATN ”
ATP ”
ATR ”
ATS ”
ATT ”
ATU ”
ATX ”
ATY ”
ATZ ”
Table 39.2: Set of AT commands where WeOS units respond ”OK”.
in the configuration database in contrast to ATE and ATV command which
are not stored. The auto-answer function can be set to off (0) or numbers of
RINGS (default 1) before answering the call.
❼ Sync connect settings: If sync connect is enabled the local and remote side
904 ➞ 2015 Westermo Teleindustri AB