Dell POWEREDGE M1000E - Manual (Page 919)

Fabric OS Message Reference 897
53-1002749-01
ZONE-1028
5
ZONE-1028
Message Commit zone DB larger than supported - greater than size>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the zone database size is greater than the limit allowed by the fabric. The limit of the zone
database size depends on the lowest level switch in the fabric. Older switches have less memory and
force a smaller zone database for the entire fabric.
Recommended
Action
Execute the cfgSize command to view the zone database size information. Edit the zone database to
keep it within the allowable limit for the specific switches in your fabric.
ZONE-1029
Message
Restoring zone cfg from flash failed - bad config saved to
[].
Message Type LOG
Severity WARNING
Probable Cause Indicates that the zone configuration restored from the flash memory was faulty. This error will save the
faulty zone configuration in the zoned core file directory.
Recommended
Action
If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
ZONE-1034
Message A new zone database file is created.
Message Type LOG
Severity INFO
Probable Cause Indicates that a new zone database file has been created.
Recommended
Action
No action is required.