Dell POWEREDGE M1000E - Manual (Page 378)

356 Fabric OS Message Reference
53-1002749-01
FCR-1037
5
FCR-1037
Message LSAN zone disabled in the backbone fabric.
Message Type LOG
Severity INFO
Probable Cause Indicates that a logical storage area network (LSAN) zone is disabled in the backbone fabric.
Recommended
Action
No action is required.
FCR-1038
Message Total zone entries exceeded local fabric limits by entries, in zone:
, zone limit: .
Message Type LOG
Severity WARNING
Probable Cause Indicates that the number of cfg, zone, or alias entries created in a local fabric is greater than the local
switch's zone database limitations.
Recommended
Action
Remove excess cfg, zone, or alias entries so that the number of logical storage area network (LSAN)
zones created is within the range of the local database limitations.
FCR-1039
Message
Local LSAN zone device entries for backbone LSAN exhausted.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of devices in the specified logical storage area network (LSAN) defined in the
backbone fabric is greater than allowed by the local LSAN zone database limitations.
Recommended
Action
Remove excess device entries from this LSAN zone until the number of devices is within the range of the
local LSAN zone database limitations.