Dell POWEREDGE M1000E - Manual (Page 448)

426 Fabric OS Message Reference
53-1002749-01
FLOD-1001
5
FLOD Messages
FLOD-1001
Message Unknown LSR type: port , type .
Message Type LOG
Severity WARNING
Probable Cause Indicates that the link state record (LSR) type is unknown. The following two LSR header types are the
only known types:
• 1 - Unicast
• 3 - Multicast
Recommended
Action
No action is required; the record is discarded.
FLOD-1003
Message
Link count exceeded in received LSR, value = .
Message Type LOG
Severity WARNING
Probable Cause Indicates that the acceptable link count received was exceeded in the link state record (LSR).
Recommended
Action
No action is required; the record is discarded.
FLOD-1004
Message Excessive LSU length = .
Message Type LOG | FFDC
Severity ERROR
Probable Cause Indicates that the link state update (LSU) size exceeds the value the system can support.
Recommended
Action
Reduce the number of switches in the fabric or reduce the number of redundant inter-switch links (ISLs)
between two switches.