Dell POWEREDGE M1000E - Manual (Page 164)

142 Fabric OS Message Reference
53-1002749-01
ANV-1007
5
ANV-1007
Message S,C: ANVIL PASS 1 low buff pool fault: field> 0x.
Message Type LOG
Severity CRITICAL
Probable Cause Indicates that Anvil Pass 1 is running out of free buffers, which may cause chip fault.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.
ANV-1008
Message S,C: MAC-VID classifier table is full. No space for new
entry.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the Media Access Control (MAC) VLAN ID (VID) classifier table is full and no more entries
can be added.
Recommended
Action
Delete some of the existing unused rules using the portcfg arp command and then add new entries.
ANV-1015
Message Port reinitialized due to Link Reset failure on internal port Snumber>,P().
Message Type LOG
Severity WARNING
Probable Cause Indicates that the specified port is re-initialized due to link reset failure.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.