Dell POWEREDGE M1000E - Manual (Page 222)

200 Fabric OS Message Reference
53-1002749-01
C3-1021
5
C3-1021
Message S,P(): Port is offline due to
Encryption Compression Block error.
Message Type LOG
Severity WARNING
Probable Cause Indicates that an internal error is observed in the application-specific integrated circuit (ASIC) hardware
that may degrade the data traffic.
Recommended
Action
When this error occurs, the software will automatically recover from the error and no action is required.
However, if the problem persists, replace the blade.
C3-1023
Message Single RDY/Frame Loss detected and recovered on Slot ,Port number>() rdy(0x)/frame(0x).
Message Type LOG
Severity WARNING
Probable Cause Indicates that above-normal errors are observed in hardware that may or may not impact the data traffic.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.
C3-1025
Message S,P(): Extra credit on
F_port:ftx= curr_cred= actual_cred=.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the device is returning the wrong number of receiver-ready (R_RDY) frames.
Recommended
Action
When this error is observed persistently, replace the device.