Dell POWEREDGE M1000E - Manual (Page 789)

Fabric OS Message Reference 767
53-1002749-01
SEC-3048
5
SEC-3048
Message FIPS mode has been enabled in the system using force option.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates the system has been forced to Federal Information Processing Standards (FIPS) mode.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
Look for the status of the prerequisites that did not conform to FIPS mode.
SEC-3049
Message
Status of bootprom access is changed using fipscfg CLI to : .
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates the status of boot PROM access has changed using the fipsCfg command.
Recommended
Action
No action is required.
SEC-3050
Message Event: , Status: success, Info:
Message Type AUDIT | LOG
Class SECURITY
Severity INFO
Probable Cause Indicates the specified Secure Shell (SSH) utility operation was performed.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.