Dell POWEREDGE M1000E - Manual (Page 863)

Fabric OS Message Reference 841
53-1002749-01
SULB-1041
5
SULB-1041
Message Firmware has been activated successfully on standby CP.
Message Type AUDIT | LOG
Class FIRMWARE
Severity INFO
Probable Cause Indicates that the firmwareActivate command has completed successfully on the standby control
processor (CP).
Recommended
Action
No action is required. The firmwareActivate command has completed on the standby CP as expected.
Run the firmwareShow command to verify the firmware versions.
SULB-1042
Message Firmwareactivate command has completed successfully.
Message Type AUDIT | LOG
Class FIRMWARE
Severity INFO
Probable Cause Indicates that the firmwareActivate command has completed successfully and the switch firmware has
been updated.
Recommended
Action
No action is required. The firmwareActivate command has completed as expected.
Run the firmwareShow command to verify the firmware versions.
SULB-1043
Message Firmwareactivate command failed. .
Message Type LOG
Severity INFO
Probable Cause Indicates that the firmwareActivate command failed. The error string value indicates the reason for
failure.
Recommended
Action
Run the firmwareShow command to verify the firmware versions.