Dell POWEREDGE M1000E - Manual (Page 796)

774 Fabric OS Message Reference
53-1002749-01
SNMP-1001
5
SNMP Messages
SNMP-1001
Message SNMP service is not available .
Message Type LOG
Severity ERROR
Probable Cause Indicates that the Simple Network Management Protocol (SNMP) service could not be started because of
the specified reason. Therefore, you will not be able to query the switch through SNMP.
Recommended
Action
Verify that the IP address for the Ethernet and Fibre Channel interface is set correctly. If the specified
reason is an initialization failure, restart the switch using the reboot command.
SNMP-1002
Message SNMP initialization failed.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the initialization of the SNMP service failed and therefore you will not be able to query the
switch through SNMP.
Recommended
Action
Restart or power cycle the switch. This will automatically initialize SNMP.
SNMP-1003
Message Distribution of Community Strings to Secure Fabric failed.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the changes in the SNMP community strings could not be propagated to other switches in
the secure fabric.
Recommended
Action
Retry changing the SNMP community strings on the primary switch.