Dell POWEREDGE M1000E - Manual (Page 760)

738 Fabric OS Message Reference
53-1002749-01
SEC-1250
5
SEC-1250
Message DCC enforcement API failed: err=, key=
Message Type LOG
Severity WARNING
Probable Cause Indicates an internal error caused the Device Connection Control (DCC) policy enforcement to fail.
Recommended
Action
Retry the failed security command.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
SEC-1251
Message Policy to binary conversion error: .
Message Type LOG
Severity ERROR
Probable Cause Indicates the security database conversion failed because of invalid values. The reason is specified in
the text message variable and the faulty value is printed in the value variable.
Recommended
Action
Retry the failed security command.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
SEC-1253
Message Bad DCC interface state during , state=.
Message Type LOG
Severity ERROR
Probable Cause Indicates an internal error has caused the Device Connection Control (DCC) policy update to fail in the
provision, commit, or cancel phases.
Recommended
Action
Retry the failed security command.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.