Dell POWEREDGE M1000E - Manual (Page 390)

368 Fabric OS Message Reference
53-1002749-01
FCR-1081
5
FCR-1081
Message The pause message is rejected by the domain .
Message Type LOG
Severity WARNING
Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has rejected the pause
message which prevented the protocol from completing. Any data traffic disruption observed during the
firmware download may have been the result of the rejected pause message.
Recommended
Action
No action is required.
FCR-1082
Message The pause retry count is exhausted for the domain .
Message Type LOG
Severity WARNING
Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric did not accept the pause
message which prevented the protocol from completing. Any data traffic disruption observed during the
firmware download may have been the result of this issue.
Recommended
Action
No action is required.
FCR-1083
Message The resume message is rejected by the domain .
Message Type LOG
Severity WARNING
Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has rejected the pause
message which prevented the protocol from completing. Any data traffic disruption observed during the
firmware download may have been the result of the rejected resume message.
Recommended
Action
No action is required.