Dell POWEREDGE M1000E - Manual (Page 733)

Fabric OS Message Reference 711
53-1002749-01
SEC-1093
5
SEC-1093
Message New FCS list must have at least one member in common with current FCS list.
Message Type LOG
Severity ERROR
Probable Cause Indicates the new fabric configuration server (FCS) list does not have a common member with the
existing FCS list.
Recommended
Action
Resubmit the command with at least one member of the new FCS list in common with the current FCS
list.
SEC-1094
Message Policy member not found.
Message Type LOG
Severity ERROR
Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds that there is an error in the security database. This is a rare
occurrence.
Recommended
Action
Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the
ready state. If a switch is in the error state, the database may not be correctly updated for that specific
switch.
SEC-1095
Message Deleting FCS policy is not allowed.
Message Type LOG
Severity ERROR
Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds the error in the security database. This is a rare occurrence.
Recommended
Action
Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the
ready state. If a switch is in the error state, the database may not be correctly updated for that specific
switch.