An-1010, An-1011, An-1012 – Dell POWEREDGE M1000E User Manual
Page 160
138
Fabric OS Message Reference
53-1002749-01
AN-1010
5
AN-1010
Message
Severe latency bottleneck detected at slot
Message Type
LOG | AUDIT
Class
FABRIC
Severity
WARNING
Probable Cause
Indicates credit loss at the specified port, a downstream port, or a very high latency device at the edge of
the fabric.
Recommended
Action
Contact your switch service provider for assistance.
AN-1011
Message
Could not distinguish between primary and dependent severe latency bottleneck on
slot
enabled on this port.
Message Type
LOG | AUDIT
Class
FABRIC
Severity
WARNING
Probable Cause
Indicates that resources that are needed to determine whether there is complete credit loss on a virtual
channel (VC) at the specified port are used by port mirroring.
Recommended
Action
Contact your switch service provider for assistance.
AN-1012
Message
Credits did not return from other end. Complete loss of credits on a VC on slot
Message Type
LOG | AUDIT
Class
FABRIC
Severity
WARNING
Probable Cause
Indicates a credit loss.
Recommended
Action
If this message is not followed by the AN-1013 message, contact your switch service provider for
assistance.