Dell POWEREDGE M1000E - Manual (Page 235)

Fabric OS Message Reference 213
53-1002749-01
CDR-1022
5
CDR-1022
Message S,P(): Link Timeout on External port,
ftx= tov= (>)
vc_no= crd(s)lost=.
Message Type LOG
Severity WARNING
Probable Cause Indicates that above-normal errors are observed in hardware that may or may not impact the data traffic.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.
CDR-1028
Message Detected excessive Link resets on the port in a second. Slot , Port
().
Message Type LOG
Severity WARNING
Probable Cause Indicates that the port received excessive link resets from peer port within 1 second and that exceeded
threshold.
Recommended
Action
When this error is observed persistently, change the small form-factor pluggable (SFP) transceiver or the
cable on the peer port to which this port is connected.