Dell POWEREDGE M1000E - Manual (Page 697)

Fabric OS Message Reference 675
53-1002749-01
RCS-1010
5
RCS-1010
Message Domain is RCS-incapable. Disabled
E_Port(s) connected to this domain.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the specified remote domain is RCS-incapable, or the RCS-capable information could not
be retrieved for the specified remote domain due to some potential routing issues.
Recommended
Action
Run the rcsInfoShow command to view RCS capability of the switch.
Investigate for routing issue or check the cabling, and re-enable the disabled E_Ports to attempt another
exchange of RCS-capable information.
RCS-1011
Message Remote domain is RCS-incapable. Configure this domain as
RCS-capable.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the specified remote domain is RCS-incapable, or the RCS-capable information could not
be retrieved for the specified remote domain due to some potential routing issues.
Recommended
Action
Run the rcsInfoShow command to view RCS capability of the switch.
Investigate for routing issue or check the cabling, and re-enable the disabled E_Ports to attempt another
exchange of RCS-capable information.
RCS-1012
Message
Local domain is RCS incapable (ForceDisabled is is RCS capable or not>), hence reject the RCS_INFO request from domain number>.
Message Type LOG | FFDC
Severity WARNING
Probable Cause Indicates that the specified domain is RCS-incapable.
Recommended
Action
Execute the supportSave command and contact your switch service provider.