Dell POWEREDGE M1000E - Manual (Page 455)

Fabric OS Message Reference 433
53-1002749-01
FSS-1004
5
FSS-1004
Message Memory shortage.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the system ran out of memory.
Recommended
Action
Execute the memShow command to view memory usage in the switch.
For a dual CP system, enable the high availability (HA) state synchronization using the haSyncStart
command. For non-bladed systems, restart the switch using the reboot command.
If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
FSS-1005
Message FSS read failure.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the read system call to the Fabric OS state synchronization (FSS) device has failed.
Recommended
Action
If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
FSS-1006
Message
No FSS message available.
Message Type LOG
Severity WARNING
Probable Cause Indicates that data is not available on the Fabric OS state synchronization (FSS) device.
Recommended
Action
If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.