Dell POWEREDGE M1000E - Manual (Page 785)

Fabric OS Message Reference 763
53-1002749-01
SEC-3032
5
SEC-3032
Message Event: , Status: success, Info: Switch is configured to reject> database.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates the specified event has occurred to accept or reject a certain database.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
SEC-3033
Message Event: fddcfg --fabwideset, Status: success, Info: Fabric wide configuration set
to .
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates the specified event has occurred.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
SEC-3034
Message Event: aaaconfig, Status: success, Info: Authentication configuration changed
from to not>.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates an authentication configuration has changed.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.