Dell POWEREDGE M1000E - Manual (Page 788)

766 Fabric OS Message Reference
53-1002749-01
SEC-3045
5
SEC-3045
Message Zeroization has been executed on the system.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates the system has been zeroized.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3046
Message
The FIPS Self Tests mode has been set to .
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates there was a change in the Federal Information Processing Standards (FIPS) Self Test mode.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3047
Message Info: RBAC permission for a CLI command: is failed.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates the user does not have permission to execute this command.
Recommended
Action
Verify the user has the required permission to execute this command.