Dell POWEREDGE M1000E - Manual (Page 417)

Fabric OS Message Reference 395
53-1002749-01
FICN-1066
5
FICN-1066
Message MemAllocFailed for GEPort= VEport= could not
create required structure.
Message Type LOG
Severity WARNING
Probable Cause Indicates an internal resource limit has been encountered so that additional control block memory could
not be allocated.
Recommended
Action
This is an unexpected event; either the maximum number of emulation devices are already in use or
there is an internal memory leak. Contact your vendor's customer support for assistance.
FICN-1067
Message Ingress Abort:Oxid=0x:Abort for
CH=0x****.
Message Type LOG
Severity ERROR
Probable Cause Indicates an abort operation has been received from a local FC interface for an emulation CH exchange.
Recommended
Action
If there were associated I/O errors at the same time as this event, contact your vendor's customer
support for assistance.
FICN-1068
Message Ingress Abort:Oxid=0x:Abort for
CU=0x**.
Message Type LOG
Severity ERROR
Probable Cause Indicates an abort operation has been received from a local FC interface for an emulation Control Unit
exchange.
Recommended
Action
If there were associated I/O errors at the same time as this event, contact your vendor's customer
support for assistance.